Measure the finished area
Enter the rectangular project length and width in US or metric units. MEASSIVO calculates the area and perimeter automatically.
PAVER PROJECT PLANNER
Paver Calculator
Estimate the pavers and supporting materials for a rectangular patio or walkway. Start with the project size, then adjust the paver, base, bedding, joint-sand and edging inputs.
PROJECT OUTPUTPavers + supporting materialsUS and metric inputs
PROJECT SETUP
Patio measurements
01
Project footprint
Enter the finished rectangular area you want to cover.
LIVE PREVIEWProject footprint
Illustrative20 ft15 ftPAVER AREA
Area: 300 ft²Paver: 8 × 4 in
The grid is a visual aid and does not represent the exact laying pattern or cut layout.02
Paver unit
Enter the nominal face size of one paver and an ordering waste allowance.
03
Supporting layers
Set a layer depth to zero when it is not part of your project.
BASECrusher run / dense-graded base
Editable planning valuesBEDDINGConcrete / bedding sand
Editable planning valuesLIVE CROSS-SECTION
Relative viewProject layer stack
Pavers8 × 4 in face size
Concrete / bedding sand1 in
Crusher run / dense-graded base4 in
Prepared subgrade / existing ground
Supporting depth5 in
Active supporting layers2
This cross-section is a relative planning visual, not a construction detail or exact scale drawing. Use project or supplier requirements for the layer depths appropriate to your site.
04
Joint sand & edging
Use supplier coverage and piece length when you know them.
05
Ordering & prices
Optional purchasing inputs turn the material estimate into a practical shopping list and partial or complete cost plan.
PAVERSPieces, pallets and price
BULK MATERIALSOrdering allowance and delivered material price
Base aggregateCrusher run / dense-graded base
Bedding sandConcrete / bedding sand
PACKAGED / LINEAR MATERIALSJoint sand and edge restraint
Joint sandBased on the coverage entered above
Edge restraintBased on the piece length entered above
PAVER PROJECT PLANNING GUIDE
Calculate the whole paver project, not just the pieces.
A paver patio or walkway usually needs more than the visible pavers. MEASSIVO keeps the finished surface, supporting layers, joint sand and edge restraint separate so you can estimate what each part of the project requires.
Choose the paver size
Use a common nominal size or enter custom dimensions, then add a waste allowance to estimate the number of pieces to order.
Estimate supporting materials
Add base and bedding depths, supplier density, joint-sand coverage and edge-restraint length to keep each material quantity separate.
Prepare the order
Add pallet information and optional prices to build a shopping list, cost estimate and supplier-ready project summary.
WHAT THE CALCULATOR ESTIMATES
Pavers, layers and finishing materials stay separate.
Pavers
Calculates pieces from the project area and paver face size, then applies your waste allowance and optional pieces-per-pallet value.
Base aggregate
Estimates order volume and weight from area, depth, density and extra-material allowance.
Bedding sand
Keeps the bedding layer separate from the aggregate base and estimates its own volume, weight and optional material cost.
Joint sand
Uses the coverage value supplied for your selected product to estimate how many bags are needed for the project area.
Edge restraint
Uses the project perimeter and the length of one restraint piece to estimate the number of pieces to order.
Material cost
Optional prices create a known-price subtotal or a complete estimated material subtotal when every active component is priced.
The calculator estimates quantities; it does not prescribe a structural pavement design. Base and bedding requirements can vary with soil, drainage, climate, traffic, product system and local specifications.
PAVER CALCULATOR FAQ
Common paver planning questions
How does the calculator work out how many pavers I need?
It divides the project area by the face area of one paver, then applies the waste percentage and rounds the order quantity up to a whole piece.
Why should I include a waste allowance?
A waste allowance can account for cuts, breakage and ordering margin. Enter the percentage appropriate to your project rather than treating the default as a required value.
Can I calculate pallets as well as individual pavers?
Yes. Enter the number of pieces in one pallet and MEASSIVO rounds the required pallet quantity up to the next whole pallet.
Does the calculator tell me the correct base depth?
No. Base and bedding depths are project inputs, not engineering recommendations. Use the requirements for your site, product system, design or supplier.
How is joint sand calculated?
Enter the coverage per bag shown by the manufacturer for your paver and joint configuration. MEASSIVO uses that coverage and the project area to estimate the number of bags.
Are the quantities and prices final order values?
No. They are planning estimates. Confirm actual product dimensions, density, coverage, packaging, availability, quantity and current pricing with your supplier before ordering.